Author Topic: XTBR / XTB-IIR mode programming utility  (Read 1675 times)

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 210
    • Owner, JV Digital Engineering
XTBR / XTB-IIR mode programming utility
« on: August 29, 2014, 07:27:45 AM »
A Maxi Controller is normally used for XTBR / XTB-IIR mode programming.  Some people have asked how to do mode programming with a CM15A or CM11A.  One of my customers wrote a nifty utility to do that, and I've sent it to anyone who asked for it.

The 1.20 XTB-IIR firmware update last fall added several new mode options, including the ability to inhibit repeating certain housecodes.  That can prevent command ping-pong in installations where more than one repeater is powered by the same utility transformer.

I updated the utility to support all new mode options except for the ability to query the AGC detection threshold.  (The X10 SDK does not support reading preset dim commands.)  A beta version of the utility is available by sending me a private request.  Also let me know which version firmware you have.

Jeff
X10 automation since the BSR days...