Author Topic: LM465 and Dim  (Read 4038 times)

x10Tim

  • Jr. Member
  • **
  • Posts: 14
Re: LM465 and Dim
« Reply #15 on: February 05, 2015, 06:06:00 PM »
Yes all working.  I violated this:
The only restriction is that it must be asserted by 50uS after the zero crossing transition from the XTB-IIR (per the X10 spec).

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 199
    • Owner, JV Digital Engineering
Re: LM465 and Dim
« Reply #16 on: February 06, 2015, 06:48:32 AM »
The XTB-IIR actually gives you almost 4 times the X10 spec (200uS), but it eventually has to switch over to looking for 120KHz signal bursts.

Jeff
X10 automation since the BSR days...