Author Topic: X10 Manuals  (Read 3202 times)

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 205
    • Owner, JV Digital Engineering
X10 Manuals
« on: August 11, 2013, 03:14:19 PM »
A few folks have been looking for X10 Manuals.  Here is a link from Tuicemen's forum that is still working:

    ftp://63.211.210.21/pub/manuals/

Better grab what you may need now just in case this one goes away too.

Jeff
X10 automation since the BSR days...

bkenobi

  • Sr. Member
  • ****
  • Posts: 97
Re: X10 Manuals
« Reply #1 on: November 26, 2013, 08:45:09 AM »
This link did not work from work for me just now.  Either I am being filtered on my end or the link is dead.

Brian H

  • Hero Member
  • *****
  • Posts: 171
Re: X10 Manuals
« Reply #2 on: November 26, 2013, 09:33:54 AM »
I believe that was the old X10WTI's FTP web site address.
Most likely gone now.
Didn't work for me either.
If the module is still being sold by the new X10Pro-USA. I believe each devices sales page has its manual avilable.

Discontinued stuff maybe a different story.
As I am not too sure if users archived copies can be shared. Guss it depends on X10Pro-USA who probably owns the copyrighted manuals.
« Last Edit: November 26, 2013, 01:13:17 PM by Brian H »

dave w

  • Full Member
  • ***
  • Posts: 31
Re: X10 Manuals
« Reply #3 on: November 26, 2013, 02:09:42 PM »
This link did not work from work for me just now.  Either I am being filtered on my end or the link is dead.
I have a few archived, are you looking for anything in particular?
This after shave makes me look fat.

Tuicemen

  • Administrator
  • Hero Member
  • *****
  • Posts: 235
  • Software Developer
    • Tuicemens Software
Re: X10 Manuals
« Reply #4 on: January 28, 2014, 04:45:49 PM »
The new owners may be needing help from anyone that had backed up the manuals.
The old servers that they got with X10 info on them are proving difficult to access :(
X10 turned me into a Software programmer.
A warning label should have been added ;)

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 205
    • Owner, JV Digital Engineering
Re: X10 Manuals
« Reply #5 on: January 29, 2014, 07:03:53 AM »
I have a few too.  Maybe it would be a good idea to maintain some sort of list of what is needed, and where to send them.

Jeff
X10 automation since the BSR days...