Author Topic: XTB Schematics  (Read 2733 times)

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 205
    • Owner, JV Digital Engineering
XTB Schematics
« on: June 08, 2014, 02:05:05 PM »
Schematics for several of the XTB devices have been uploaded to the website:

http://jvde.us/xtb/xtb_schematic_v11.pdf  (original XTB signal booster)

http://jvde.us/xtb/xtbr_schematic_v10.pdf  (original version of XTBR with X10 Boost input)

http://jvde.us/xtb/xtbr_schematic_v11.pdf  (current version of XTBR that shares the XTB-523 PCB)

http://jvde.us/xtb/xtbm_schematic_v12.pdf  (XTBM / XTBM-Pro)

These are also linked off the XTB home page:  http://jvde.us

Jeff
« Last Edit: April 22, 2015, 10:05:29 PM by Jeff »
X10 automation since the BSR days...

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 205
    • Owner, JV Digital Engineering
Re: XTB Schematics
« Reply #1 on: April 22, 2015, 10:36:48 PM »
The JV Digital Engineering website has been completely revamped, with each product having its own page.  Current schematics for all devices are now on line, and are linked on the individual web pages. All product descriptions have been converted to pdf files for easier download too.

The XTB homepage is now just http://jvde.us

Many prior document versions are still on line to support old links.

Jeff
X10 automation since the BSR days...

Brian H

  • Hero Member
  • *****
  • Posts: 172
Re: XTB Schematics
« Reply #2 on: April 23, 2015, 03:30:21 AM »
Great job on the new web design.

bkenobi

  • Hero Member
  • *****
  • Posts: 101
Re: XTB Schematics
« Reply #3 on: April 24, 2015, 03:14:35 PM »
Looks great and a lot easier to locate information!

joesam

  • Full Member
  • ***
  • Posts: 27
Re: XTB Schematics
« Reply #4 on: April 24, 2015, 03:39:39 PM »
Who says good looks don't matter!  Very nice job, Jeff.

I did notice while cruising, that on your Automation Links page that you wrote HCI instead of HCA for Home Control Assistant.  Of course I only noticed 'cause I use HCA.

Jeff

  • Administrator
  • Hero Member
  • *****
  • Posts: 205
    • Owner, JV Digital Engineering
Re: XTB Schematics
« Reply #5 on: April 24, 2015, 08:40:33 PM »
Who says good looks don't matter!  Very nice job, Jeff.

I did notice while cruising, that on your Automation Links page that you wrote HCI instead of HCA for Home Control Assistant.  Of course I only noticed 'cause I use HCA.

Thank you and everyone else for the kind feedback.

And thank you for catching that.  (Fixed)

Everyone, please let me know if you find any other mistakes.  As you can imagine, it was a pretty significant effort, and there are probably still some loose ends and broken links.  (The document index pages are not finished yet.)

Jeff
X10 automation since the BSR days...

 

succession-resounding